Flite Technology
|
Flite Technology |
|
Barrels/Cylinders Extrusion and Injection
|
||
 CYL/Tech series, manufactured- bimetallic and nitride. Iron/boron CYL/Tech 110 for abrasion, 6.2-64 RC Nickel/chrome CYL/Tech 880 for extreme abrasive conditions. |
 Trimetallix and CYL/Tech injection barrel resleeving- Resleeving for high wear stroke areas. Various liner compositions including bimetallic and tool steel. Excellent heat transfer-thermocouple holes replugged and tapped as necessary to prevent leakage. Sleeves properly secured. |
 CYL/Tech Liners Twins Resleeved and Maufactured- Nitrided I.D.s bored out and new bimetallic liners installed or existing liners replaced. Liners available include CYL/Techtm 110,330, and 880. |
Special Barrel Services
|
|||
 Barrel Honing- Honed to and even oversized dimension and screw flights rebuilt oversized to acquire original factory clearances and specifications. Gives barrel another life; screw can later be ground down to match new barrel. |
 Venting- Flow diverters reduce vent clogging while minimizing leakage and are also heat conducive. Vent plugs are honed in position for excellent fit. Stacks added. |
 Extensions- Barrels extended for longe L/D/ ratios. |
 Feed Housings Resleeved |
 Cracked- and Broken barrels repaired. |
 Thermocouple- and pressure gauge holes installed or repaired. |
 Output ends- Refaced to correct leakage or pressure drop problems. |
 High Pressure Barrel-End for extra protection and increased structural intregrity. |
 Jackets- Jacket added to existing barrels to place vents and vent plugs where none existed before. |
 Rifed Liners |
 All Stainless Steel Barrels- For extremely corrosive environments. |
 Super Thick Liners- For applications that can stand considerable wear on I.D. and must still provide additional protection at this stage of wear. |
